I'm currently working on some Order of Services for a friend. I decided to try out the hot foil printer that my Dad gave me. I used to help him print business cards with it many years ago so it was a bit of a fiddle to get it working and set up right.
I found this old photo of me and my Dad using the machine in 1985, (I remember that dodgy cardigan well)- I may have aged a bit since then (who am I kidding, of course I have!), now I have reason to avoid the camera, don't know why I always did that. I wish I'd paid more attention to my instructor when I was younger, but anyway, I think I've got it sussed now. More on that later on.
While the machine was heating up and cooling down and heating up again (so that I could test it and make fine adjustments without burning my fingers), I made this fiddly thankyou card.
I used some fine nylon beading thread and glued it with Craft Tacky Glue
between two punched out butterflies. In order for this to stay in place while it was drying, I had the thread stretched straight and stuck to my glass cutting mat with tape.
Inside I used a couple of punched hearts to hold the thread in place. My thread was longer than the card, and while it was drying I again stuck the thread to the glass cutting mat on either side. I only trimmed it once it was dry.
Before the card was inserted in the envelope I gave the butterfly about 5 twists so that when the card is taken out and opened it spins around a little.
(The pretty punched designs are all from Tonic Studios.
Tonic Tools used..
*punchetti is my word for the little bits that are punched out of the pattern punches.