making a throw...

I promised you I would show you how to make a throw from a cheap store bought fleece throw and some toile fabric the same size. The reason for using cheap store bought fleece was I figured that it was not as expensive as fleece fabric per metre - it would probably cost twice as much. The fleece cost me less than £3. The toile I had was a remnant so was not expensive either.  I have made this one a birthday gift for a friend. She doesn't read this blog - I hope!

Before you do anything to your fabric, you can embellish the fleece side- this is optional. I did an applique in felt and embroidered my friend's name. I chose a pheasant because I was looking at one in the forest at the back of my house while I was trying to decide what to do.

Once that's done,  pin the right sides together of your fleece and fabric. My fleece throw had hems- some don't, if they have hems, just keep your line of sewing in a bit so that you can lose the hem when you trim.

I used my newly serviced machine - why did I wait so long, it's running like a dream now! Sew right the way round leaving a gap of about 8 inches so you can turn the fabric. Trim the excess fabric off once you have sewn round it.

Turn the right way around...

...and press carefully.

Now sew twice round leaving about a 2 inch space between each border. I use a bit of masking tape stuck on the sewing plate of my machine to line up the fabric to. I used brown for my top thread and white for my bottom thread.

Don't forget to oversew the gap. 

And that is pretty much it. And if she is in the mood for fleecy and cosy she can use this side.

And if she is in the mood for a spot of toile, she can use the other.
I hope she likes it, and I hope I have inspired you.

Matchbook notebook tutorial

Here is how to make a little matchbook notebook.

I'll try to keep the instructions as simple as possible-

it's not rocket science after all ;-)

 Feel free to change the sizes to suit yourself. 

This is the size that works for me. :-)

Cut your card in a 2, 1/8" strip (I'm using A4 card)

I used my Tonic Studios handy Super Trimmer, 
Score your card at 1/2",   3/4",   3,1/4"   3, 1/2"
If you don't have one of these you could always use 
a ruler and a biro that has run out of ink as your scoring implement.

 Now cut to 5, 5/8"

 Tada! Now for the inside..

( This is an additional step you can do if you own a perforating tool like this rotary perforator.)
I like to add this step to my matchbook notebooks so that it is easy to tear a page out neatly from the stack. Each notebook only uses two pieces of paper.

  It takes more time to make, but I think the finished result is worth the effort.
Using the perforator cut longways down an A4 piece of paper at 1/4" , 2, 5/8", and 5".

 Then trim the paper across the way into 2" strips

 and then into 2, 3/8" lengths

 Stack them neatly, aligning them by tapping the edge on a flat surface, then clip together at the end opposite the perforations with a bulldog clip. I use a little scrap of paper to protect the stack from being indented by the clip.

 Using another scrap of paper the same width, make a little hole template with which to mark out the holes. You can see the diagram to get the right idea for hole spacing.

Pierce the holes in the cover using the same template.

 Using embroidery floss sew from the front to the back leaving a little tail to tie, then stitch back over so you end up with a complete stitch and two tails to the front. 

 Tie in a double knot and trim leaving about 1/4" for decorative effect.
I think this effect looks quite Japanese.

 Use a decorative punch for the front cover, or you can embellish any other way your choose.
I used my little birdy punch from Tonic Studios.

and there you have it. A lovely little gift item that could be used for wedding favours, or party bags, or any other reason you choose.

(joined linky party at http://ppp-makeitmonday.blogspot.com/)

Vintage Leather

I finished this chair yesterday after I finally found the piece of leather I'd been looking for (while looking for something else of course). The cushion is one I made a long time ago. It is crazy patchwork and incorporates some hand drawn butterflies. It is trimmed with my favourite red pom poms. I love pom pom trim! Sad, but true!

Here it the chair in it's before state. 

It was another one of my £1 auction bargains.  I think it looks quite "gentleman's study" now. I love the look of the vintage leather, and I only bent a few of the brass upholstery nails in the process! 

I had a little scrap of leather left over, so I upcycled an evaporated milk tin and made a nice pen pot to go with the desk mat and the chair.

I cut the leather to size and then ran it through my "ready for a service" sewing machine before glueing it onto the tin. It's an easy make but looks quite classy. If you have any scraps of old leather, this would make a nice gift for the man in your life.